Outdoor · Flexible & Creative Shapes

P3.076 Outdoor Flexible LED Display Collection

A P3.076 outdoor flexible LED display is the brightest curve we ship outside: 105,625 pixels per square meter at a true 3.0769mm, 4,500–5,000 nits through direct sun, fully sealed silicone-potted masks with UV-proof faces — the rental world’s favorite pitch, weatherized and lit for the street.

Definition

What Is a P3.076 Outdoor Flexible LED Display?

A P3.076 outdoor flexible LED display runs a true 3.0769mm pitch — 320÷104, no rounding — so each 320×160mm panel carries 104×52 pixels on 42 Chipone (ICND series) driver ICs, scanned 1/26 with two of the 52 rows lit. The outdoor sealing system is the family’s outdoor standard: fully sealed silicone-potted masks, anti-UV waterproof faces, high-protection waterproof soft cables through sealed connectors, and fully sealed curved cabinets behind every panel.

Where it wins: street-facing curves that must fight the sun — column arrays, facade bands, gateway arches viewed from about 4.5m back. For the same pitch in its rigid life, the P3 outdoor LED display collection covers flat walls in armor; for indoor curves at the same grid, the P3.076 indoor flexible LED display runs the interior life. The pixel pitch guide maps the ladder.

Module Solutions

Which Module Sizes Does a P3.076 Outdoor Flexible LED Display Use?

Two formats at a true 3.0769mm, both sealed for weather: the industry-standard 320×160mm soft panel at 104×52 on fully sealed curved sheet-metal cabinets, and the 250×250mm panel at 80×80 that seats into 500-series outdoor curved die-cast cabinets.

Shape Family

How Does a P3.076 Outdoor Flexible LED Display Build Cylinders, Waves and Custom Shapes?

One panel family, four shape grammars — weatherized and lit. The fully sealed cabinets do the shaping outdoors, the potted modules follow them, and the bending rules stay family-standard: curvature across the panel width, never along a lamp row, with every seam sealed against the weather.

In Action

What Do Outdoor Flexible LED Installations Look Like in Action?

Outdoor Sealing Engineering

What Makes a P3.076 Outdoor Flexible LED Display Survive the Weather?

Taking a soft module outside adds a second engineering problem to the bending problem: everything that flexes must also seal — and at 4,500–5,000 nits, everything that seals must also stay cool. Four systems solve it together.

Optically this is the family’s outdoor peak: SMD1415 or SMD1921 outdoor lamps on a high-contrast panel at 4,500–5,000 nits — the brightest flexible spec we ship — with 12–16 bit grayscale and 3840Hz refresh for camera-facing facades. After assembly the full screen passes per-pixel compensation through the control system, so 105,625 dots per square meter read as one continuous image across every curve, in every season, at every hour.

Power

Which Power Supplies Run a P3.076 Outdoor Flexible LED Display?

At 105,625 pixels per square meter and 4,500–5,000 nits, a square meter draws roughly 650–800W at peak and 280–350W on average outdoor content — industry reference figures for this class. A typical build carries two to three outdoor-rated 5V/40A rails per square meter, mounted in the sealed cabinets with weather-protected wiring.

Compare the full lines in the CZCL, MEAN WELL and G-Energy power collections — all three ship as standard on this collection depending on the tier you specify.

Control Systems

Which Control Systems Drive a P3.076 Outdoor Flexible LED Display?

A 105,625-pixel outdoor canvas needs a controller that can map it — and survive the cabinet it lives in. Synchronous systems from six brands drive this collection, all running the receiving-card layer of NovaStar AT20 or Colorlight i9 cards, all supporting the full-screen per-pixel compensation that keeps a curved facade seamless. Street-level builds run PC-free on the asynchronous side.

Full lineups, loading tables and selection guides live on the brand hubs: NovaStar, Colorlight, Huidu, Mooncell, VDWALL and RGBlink.

Find Your Build

Which P3.076 Outdoor Flexible LED Display Build Fits Your Project?

Route by geometry and by family — this page is the outdoor life of the pitch, and its two siblings complete the picture.

Pricing

How Much Does a P3.076 Outdoor Flexible LED Display Cost?

Screen-body pricing, FOB — frames, control and freight quoted per project. The outdoor sealing system plus the family’s brightest outdoor spec sit above the P2.5 outdoor tier — brightness, density and sealing together are what the premium buys.

Module-level cross-check from the same scan: 320×160mm outdoor-grade soft modules run about $50–100 per panel in volume (19.53 panels/㎡ ≈ $975–1,950 before framing); 250×250mm $70–120 (16 panels/㎡). September 2026 market listing scan — Made-in-China, Alibaba and trade price lists, factory-direct FOB.

1. The 320×160mm build is the supply-depth play — the most widely stocked outdoor-grade soft format at this pitch, so price, spares and lead time all sit at their floor.
2. The 250×250mm build is the fleet play — the premium buys a wall that reconfigures from flat to curved using outdoor cabinets you already own.

Applications

Where Does a P3.076 Outdoor Flexible LED Display Earn Its Keep?

Eight venues put the family’s brightest outdoor soft module to work — sun-facing shapes, viewers from 4.5m back, and brands that need the curve and the brightness at once.

Reference Builds

What Do Typical P3.076 Outdoor Flexible LED Display Projects Look Like?

Four build patterns this collection is engineered around — configurations and module counts as quoted on our production sheets.

FAQ

What Should You Ask Before Buying a P3.076 Outdoor Flexible LED Display?

1. How far can a P3.076 outdoor flexible LED display bend?

Soft modules of this family take U-shaped bends up to 120°, and the 320×160mm format follows a minimum cylinder diameter of roughly 815mm in industry bending tests. Curvature runs across the panel width, never along a lamp row — final radii are confirmed against the project drawing before the sealed frames are rolled.

2. SMD1415 or SMD1921 — which outdoor lamp should I order?

SMD1415 is the value tier for walls with generous viewing distances and controlled content; SMD1921 is the outdoor standard — a larger, tougher lamp for facades that face sun, cameras and long daily hours. Both run 4,500–5,000 nits; the tier shows in color stability under stress, and the choice is a whole-wall decision made at order time.

3. P3.076 outdoor flexible or P3 outdoor rigid — how do I choose?

Same pitch, same outdoors — the surface decides. If the wall bends around a column, band or arch, the flexible line buys geometry rigid cabinets cannot follow; if the wall is flat, the P3 outdoor rigid collection serves it in armor at lower cost. Many programs run both: rigid for the flat runs, flexible for the curves.

4. How much does a P3.076 outdoor flexible LED display cost per square meter?

Screen-body pricing runs about $1,000–1,600 per square meter on fully sealed curved cabinets and $1,200–1,900 in outdoor curved die-cast cabinets, FOB — the sealing system plus the family’s brightest outdoor spec. Frames, control and freight quote per project.

5. Is 4,500–5,000 nits the right brightness for a sunlit facade?

Yes — and it is the brightest outdoor spec in the flexible family. 4,500–5,000 nits carries street-level and near-field facades through direct sun, with the adjustable range matching the site’s exposure. Long-throw billboards facing open sky remain the one condition that argues for the rigid outdoor line’s higher brightness.

6. Will bending damage the LEDs or let water in?

Not within the rated curve. The 0.2mm FPC spreads bending stress, the silicone-potted mask seals every lamp foot before and after bending, and the anti-fatigue sealed cables take the daily flex. Full-screen per-pixel compensation after assembly catches any marginal joint before it ships.

7. Do the magnets and the waterproofing work together?

Yes — the magnet front service is designed into the waterproofing: modules seat on locating pins through the sealed cabinet face, high-pull magnets carry alignment beyond the module’s few-hundred-gram load, and the frame tolerance of ±1.5mm keeps the sealed faces splice flush.

8. Are seams visible on a curved outdoor wall?

The precision silicone base shell keeps panel faces in plane without shims, and full-screen per-pixel, per-color compensation matches brightness across the canvas. From the format’s intended 4.5m viewing distance outward — through a sunlit afternoon — the wall reads as one continuous image.

Buyer’s Guide

Where Does P3.076 Sit in the Outdoor Flexible Family?

The outdoor soft-module series opened with P2.5 — the volume pitch, weatherized. This collection steps up to the series’ brightest: P3.076, the creative-rental world’s favorite pitch, rebuilt at 4,500–5,000 nits behind the same fully sealed silicone-potted system. The family recipe carries over — 0.2mm flexible PCB, silicone base shell, strong-magnet front service — wrapped around 105,625 pixels per square meter at a true 3.0769mm, viewed from about 4.5 meters back.

The density conversation also changes character outdoors. At 105,625 dots per square meter, the pitch holds fine text, faces and product detail at distances where a 2.5mm wall would be paid for detail the street never sees — and the brightness tier exists precisely because outdoor walls are read through reflections, glare and the full afternoon sun. The 4.5-series buyer is buying the sharpest outdoor curve that still fights the daylight, one step above the volume tier in both pitch and price.

Two Lamp Tiers at 5,000 Nits: The Cooling Story Behind SMD1415 and SMD1921

Brightness is a thermal decision before it is an optical one. At 4,500–5,000 nits, the lamp choice between SMD1415 and SMD1921 is really a choice about how the wall handles the heat its own output generates — and outdoors, in a sealed silicone-potted system, that heat management is the endurance story. The SMD1921’s larger foot spreads both the drive current and the bending stress across more area, which is why it is the outdoor standard for facades that run all day in the sun.

The sealing system carries the rest of the thermal load. The potted mask conducts heat away from the lamp feet into the sealed cabinet, the fully sealed curved enclosures vent the drive electronics separately, and the waterproof soft cables keep the power path cool along the arc. Everything on this collection is engineered as one thermal-and-sealing system — because at the family’s outdoor peak, brightness and endurance are the same specification.

Same Pitch, Two Lives: Flexible Indoor vs the P3 Outdoor Line

P3.076 runs two full product lives at our factory. The P3 outdoor collection is the rigid life — weather-sealed, daylight-bright cabinets for flat walls and long runs. This collection is the soft life: the same 3.0769mm grid in a body that bends around columns, bands and arches, front-serviced through a waterproof face. Indoors, the P3.076 indoor flexible LED display covers the third life at lower brightness — the grid stays, the environment changes.

The buyer’s rule holds across all three: where the wall bends and the sun hits, this collection; where the wall is flat and the weather attacks, the rigid outdoor line; where the grid is needed indoors, the indoor tier. One pitch, three environments, one content pipeline — because the 104×52 grid, the 80×80 rental matrix and the controller profiles all carry across the lives without rescaling.

What Does Installing a P3.076 Outdoor Flexible LED Display Involve?

The install adds a weather checklist to the family routine — and at 4,500–5,000 nits, a thermal one. The survey fixes each radius, the fully sealed sheet-metal frames roll to match within ±1.5mm, and every seam on the shop drawing carries its sealing detail before fabrication starts. The modules then go on front-first through the waterproof face: locating pins align, magnets seat through the sealed structure, and the outdoor waterproof soft cables route along the arc through sealed connectors.

Commissioning closes each bay with full-screen per-pixel compensation against the installed canvas — the anti-UV face and the sealed joints verified in the same pass — and the brightness schedule is set for the site’s sun exposure. A column-array program of the kind this tier serves typically phases bay by bay over a week, and because every module services from the front through the waterproof face, the venue’s maintenance plan never involves opening the weather line.

What Maintenance Does a P3.076 Outdoor Flexible LED Display Need?

Front service through the waterproof face is the design promise: a misbehaving module comes off with a suction tool in under a minute and a sealed replacement seats in the same way — no rear access, no breaking the weather line. The 320×160mm outdoor-grade soft module is stocked across the market, and every program ships with 3% free spare modules, which across a streetscape fleet is a working spares bay.

Routine care adds an outdoor habit to the family standard: the anti-UV faces rinse clean with soft, low-pressure washing on the scheduled window, the sealed connectors are glanced over where the cables exit the arc, and the annual full-screen per-pixel compensation re-run keeps the canvas matched as lamps age. On a wall that runs at 5,000 nits through seasons of sun, that annual morning is what keeps the brightness story the client signed for.

How Does Content and Brightness Behave Outdoors at 5,000 Nits?

At 105,625 pixels per square meter, a 1080p canvas maps onto roughly 10.2 square meters — so a column array or a facade band carries full-HD content natively across most of its run, and from the tier’s 4.5m viewing distance the 3.0769mm matrix reads as a continuous image through a sunlit afternoon. Motion graphics, live feeds and brand loops all land exactly as authored.

The brightness headroom is what separates this tier from the volume pitch below it. The 4,500–5,000-nit range carries direct-sun afternoons at street level and still steps down gracefully for evening programs — the schedule the control system runs per wall. The 3840Hz refresh with 12–16 bit grayscale keeps the wall camera-clean for the footage every outdoor program generates, and content authored on the 104×52 or 80×80 grid carries between the flexible walls and the rigid line without rescaling.

The Bottom Line on the P3.076 Outdoor Flexible LED Display

A P3.076 outdoor flexible LED display is the brightest curve in the flexible family — the creative-rental world’s favorite pitch at its outdoor peak. The 320×160mm module covers column arrays, facade bands and gateway arches at 4,500–5,000 nits behind a fully sealed, UV-proof face; the 250×250mm format seats the 3-series matrix into outdoor rental ironwork fleets already own. From about 4.5 meters back, 105,625 pixels per square meter read as one continuous image through the direct sun — and the same pitch’s indoor twin and rigid twin are both already on the shelf. When the curve has to fight the daylight, this is the collection that wins it.

Related Collections

Ready to Curve Your Outdoor Wall?

Send the column diameter, wave profile or arc drawing — we return a module layout, sealed frame drawing and screen-body quote from the P3.076 outdoor flexible LED display collection within 24 hours.