P2.5 Indoor LED Screen for Church in Nigeria – 4.8×2.4m Ehonor Series Case Study | UnifyLED
Thanks to the Living Faith Church in Nigeria for choosing UnifyLED. We completed this P2.5 Ehonor Series indoor LED screen for the church and shipped it ready to install on the stage wall: 4.8×2.4m in total, built from 75 ultra-light 480x320mm aluminum panels in a 15×5 layout. Each panel weighs 2.7kg, so a small crew can carry and mount the full wall quickly. The screen holds 1920×960 pixels and runs at a 3840Hz refresh rate, so worship lyrics, sermon slides, and live video stay sharp on camera and readable from every seat.
Short answer: This case study documents a P2.5 Ehonor Series indoor LED screen for church installed in Nigeria. The 4.8×2.4m (11.52m²) screen is built from 75 480x320mm aluminum panels with 320x160mm SMD modules, 600-800 nits brightness, and a 3840Hz refresh rate. Below you will find the full configuration, installation photos and video, and the factors that decide a church LED screen project like this one.
Project snapshot: P2.5 indoor LED screen for church in Nigeria
| Location | Nigeria (church sanctuary, stage wall) |
| Screen size | 4.8×2.4m (11.52m²) |
| Product | Ehonor Series indoor LED display |
| Pixel pitch | P2.5 indoor, SMD |
| Panels | 75 x 480x320mm aluminum, 2.7kg each (15 wide x 5 high) |
| Module | 320x160mm, 3 per panel |
| Resolution | 1920×960 pixels |
| Refresh rate | 3840Hz |
| Brightness | 600-800 nits |
| Viewing angle | 160°/160° |
| Colors | 68.7 billion |
| Power | 800 W/m² max / 300 W/m² average |
| Maintenance | Magnetic front access, tool-free |
What configuration does this church indoor LED screen use in Nigeria?
The 4.8×2.4m church indoor LED screen is assembled from the standard Ehonor 480x320mm platform, the same panel format used for fixed indoor walls worldwide:
- Panels: 75 aluminum panels in a 15×5 layout. Each weighs 2.7kg, so the full wall adds up to about 203kg – light enough for the church’s install crew to handle with a simple scaffold.
- Modules: 320x160mm SMD modules, three per panel, so every panel runs a clean pixel matrix.
- Resolution: 1920×960 total pixels across the 4.8×2.4m area – a 2:1 ratio that matches the stage backdrop.
- Refresh rate: 3840Hz, so phone cameras and broadcast cameras capture lyrics and video without scan lines.
- Brightness: 600-800 nits, matched to sanctuary lighting with no glare for the congregation.
- Service: every panel mounts on 16 magnets – modules and panels swap from the front with no tools and no rear clearance.
How was the indoor LED screen installed at the church in Nigeria?
The Ehonor Series mounts on a steel frame attached to the stage wall. For this project the panels were carried up on scaffolding and snapped into position row by row – each panel locks in on its 16 magnets, then links to the neighboring panels for power and signal. The video below shows the install crew building the wall.
The on-site photos show the panels going up on the black stage backdrop, with the scaffold still in place behind the screen.
What does the church LED screen look like when running in Nigeria?
The wall runs the church’s live service feed, sermon slides, and welcome graphics. The video below shows the completed screen displaying the church’s branded welcome graphic for its annual New Year event.
What makes the Ehonor Series a good fit for church LED screens in Nigeria?
- 2.7kg aluminum panels that survive repeated handling and re-configuration without bending, and cut freight cost per square meter on shipments to Nigeria.
- 16 magnets per panel for tool-free front mounting and fast module-level service from the auditorium side – no rear walkway required.
- 3840Hz refresh rate and 68.7 billion colors, so cameras capture the service without scan lines and gradients render without banding.
- Quiet operation – turbo cooling vents release heat without fans inside the panel, so the wall does not add noise during services.
- HOB and COB encapsulation options on finer pitches add protection in high-traffic sanctuary areas.
See the full Ehonor Series specification for indoor pitch options from P1.25 to P3.076, and how the same panels built an 8×1.92m wall for RCCG Church Swindon in the UK.
How much does a 4.8×2.4m P2.5 church LED screen cost?
LED screen pricing is project-based. An 11.52m² P2.5 church wall is quoted on the exact configuration – pitch, panel quantity and accessories, control system, and freight to destination. Send the sanctuary dimensions and content type, and we return an itemized factory quotation with the bill of materials. Compare the 3.84×3.2m Ehonor P2.5 indoor LED screen in Lagos or browse the Ehonor Series pitch options first.
Why order a church LED screen from UnifyLED?
UnifyLED is a professional LED screen manufacturer with 13 years of export experience, supplying display solutions to 58+ countries including church projects across Africa and Europe. Every panel passes a 72-hour aging test before shipping, products carry CE/FCC/UL/RoHS certification, and each screen includes a 2-3 year warranty with free common spare parts. Technical support answers with video guidance and remote assistance, and our logistics team handles cross-border transport and customs clearance.
Frequently asked questions about this church LED screen case
What pixel pitch is this church LED screen?
P2.5 – 2.5mm between pixel centers, the pitch most churches choose for indoor walls viewed from 2.5 meters and beyond.
How many panels does a 4.8×2.4m church LED screen need?
75 panels of 480x320mm in a 15×5 layout. At 2.7kg per panel the full screen weighs about 203kg.
What screen size works best on a church stage?
A 4.8×2.4m (2:1) wall is a common choice – wide enough to carry lyrics and sermon slides above the stage without blocking the view, and large enough to serve sanctuaries seating 500-1000 people. The same Ehonor platform built an 8×1.92m wall for RCCG Church Swindon in the UK.
What warranty does this church LED screen carry?
2-3 years with extended coverage available, free common spare parts shipped with the screen, and 24/7 remote support – details on the warranty page.
References & sourced from: UnifyLED Ehonor indoor LED screen specifications
Specifications in this case study are sourced from the UnifyLED Ehonor Series 480x320mm indoor LED display technical sheet. More engineering questions are covered in the LED display FAQ, and finished projects are collected under LED screen solution cases.