Ehonor P2.5 3.84×3.2m Indoor LED Screen in Lagos, Nigeria
Thanks to our customer in Lagos, Nigeria for choosing UnifyLED. We completed this P2.5 Ehonor Series indoor LED screen and shipped it ready to install: 3.84×3.2m in total, built from 80 ultra-light 480x320mm aluminum panels in an 8×10 layout. Each panel weighs 2.7kg, so a small crew can carry and mount the full wall quickly. The screen holds 1536×1280 pixels and runs at a 3840Hz refresh rate, so text and video stay sharp on camera and readable from every seat.
Short answer: This case study documents a P2.5 Ehonor Series indoor LED screen installed in Lagos, Nigeria. The 3.84×3.2m (12.29m²) screen is built from 80 480x320mm aluminum panels with 320x160mm SMD modules, 600-800 nits brightness, and a 3840Hz refresh rate. Below you will find the full configuration, installation photos and video, and the factors that decide a project like this one.
Project snapshot: P2.5 indoor LED screen in Lagos, Nigeria
| Location | Lagos, Nigeria |
| Screen size | 3.84×3.2m (12.29m²) |
| Product | Ehonor Series indoor LED display |
| Pixel pitch | P2.5 indoor, SMD |
| Panels | 80 x 480x320mm aluminum, 2.7kg each (8 wide x 10 high) |
| Module | 320x160mm, 128×64 pixels per module |
| Resolution | 1536×1280 pixels |
| Refresh rate | 3840Hz |
| Brightness | 600-800 nits |
| Viewing angle | 160°/160° |
| Colors | 68.7 billion |
| Power | 800 W/m² max / 300 W/m² average |
| Maintenance | Magnetic front access, tool-free |
What configuration does this 3.84×3.2m indoor LED screen use?
The 3.84×3.2m indoor LED screen is assembled from the standard Ehonor 480x320mm platform, the same panel format used for fixed indoor walls worldwide:
- Panels: 80 aluminum panels in an 8×10 layout. Each weighs 2.7kg, so the full wall adds up to about 216kg – light enough for a small install crew to handle without lifting equipment.
- Modules: 320x160mm SMD modules, 128×64 pixels each, so every panel runs a clean pixel matrix.
- Resolution: 1536×1280 total pixels across the 3.84×3.2m area.
- Refresh rate: 3840Hz, so phone cameras and broadcast cameras capture the picture without scan lines.
- Brightness: 600-800 nits, matched to indoor venue lighting.
- Service: every panel mounts on 16 magnets – modules and panels swap from the front with no tools and no rear clearance.
How was the indoor LED screen installed in Lagos?
The Ehonor Series mounts on a standard steel frame or wall structure. For this project the panels were attached row by row – each panel snaps into position on its 16 magnets, then links to the neighboring panels for power and signal. The video below shows the completed wall in the venue.
The on-site view shows the installed screen with venue content playing, the rows of seating in front of the wall, and the minimal footprint of the frame behind it.
What does the Ehonor P2.5 indoor LED screen look like when running?
With 160°/160° viewing angles and 68.7 billion display colors, the screen keeps slides, video, and live feeds readable from the front row to the back wall – the reason P2.5 remains a workhorse pitch for indoor walls around 12m² in this region.
What makes the Ehonor Series a good fit for indoor LED screens?
- 2.7kg aluminum panels that survive repeated handling and re-configuration without bending, and cut freight cost per square meter.
- 16 magnets per panel for tool-free front mounting and fast module-level service from the audience side.
- 3840Hz refresh rate and 68.7 billion colors, so cameras capture the picture without scan lines and gradients render without banding.
- HOB and COB encapsulation options on P2 and finer pitches add impact and moisture protection in high-traffic venues.
- Turbo cooling vents release heat without fans inside the panel, keeping the wall quiet in auditoriums and conference halls.
See the full Ehonor Series specification for indoor pitch options from P1.25 to P3.076.
How much does a 3.84×3.2m P2.5 indoor LED screen cost?
LED screen pricing is project-based. A 12.29m² P2.5 indoor wall is quoted on the exact configuration – pitch, panel quantity and accessories, control system, and freight to destination. Send the installation location and content type, and we return an itemized factory quotation with the bill of materials. Compare the RCCG Church Swindon installation – an 8×1.92m Ehonor P2.5 wall in the UK – or browse the Ehonor Series pitch options first.
Why order an indoor LED screen from UnifyLED?
UnifyLED is a professional LED screen manufacturer with 13 years of export experience, supplying display solutions to 58+ countries. Every panel passes a 72-hour aging test before shipping, products carry CE/FCC/UL/RoHS certification, and each screen includes a 2-3 year warranty with free common spare parts. Technical support answers with video guidance and remote assistance, and our logistics team handles cross-border transport and customs clearance.
Frequently asked questions about this indoor LED screen case
What pixel pitch is this indoor LED screen?
P2.5 – 2.5mm between pixel centers, the pitch most buyers choose for 12m² indoor walls viewed from 2.5 meters and beyond.
How many panels does a 3.84×3.2m Ehonor screen need?
80 panels of 480x320mm in an 8×10 layout. At 2.7kg per panel the full screen weighs about 216kg.
Can the same Ehonor panels be reconfigured for other wall sizes?
Yes. The magnetic mounting and standard 480x320mm format let installers lift panels off and rebuild the wall on any multiple of the panel grid – the same platform used for the 8×1.92m RCCG Church installation in the UK.
What warranty does this indoor LED screen carry?
2-3 years with extended coverage available, free common spare parts shipped with the screen, and 24/7 remote support – details on the warranty page.
References & sourced from: UnifyLED Ehonor indoor LED screen specifications
Specifications in this case study are sourced from the UnifyLED Ehonor Series 480x320mm indoor LED display technical sheet. More engineering questions are covered in the LED display FAQ, and finished projects are collected under LED screen solution cases.